Prof. Robert Betz

Work Phone	(02) 4921 6091
Fax	(02) 4921 6993
Email	Robert.Betz@newcastle.edu.au
Office	EAG16, Engineering A

Highlighted Publications

Year	Citation	Link
2002	Betz Robert Eric, Jovanovic M G, 'Theoretical Analysis of Control Properties for the Brushless Doubly Fed Reluctance Machine', IEEE Transactions on Energy Conversion, 17 332-339 (2002) [C1]
2002	Jovanovic M G, Betz Robert Eric, Yu J, 'The Use of Doubly Fed Reluctance Machines for Large Pumps and Wind Turbines', IEEE Transactions on Industry Applications, 38 1508-1515 (2002) [C1]
2006	Summers Terrence James, Betz Robert Eric, McGrath Brendan Peter, Goodwin Graham Clifford, 'Induction Machine Shaft Speed Estimation using Imaginary Power', Proceedings of the EPE-PEMC 2006 12th International Power Electronics and Motion Control Conference, Portoroz, Slovenia (2006) [E1]
2002	Summers Terrence James, Betz Robert Eric, 'Dead-time Issues in Predictive Current Control', Conference Record of the 2002 IEEE Industry Applications Conference 37th IAS Annual Meeting, Pennsylvania (2002) [E1]

Publications

For items published while at an institution other that the University of Newcastle, details are shown in italics.

Click on a category title below to expand the list of citations for that specific category.

Chapters In A Book (2 outputs)

Chapter in A1 Book (B1) (1 outputs)

Year	Citation	Link
2002	Betz Robert Eric, 'Modeling and Control of Synchronous Reluctance Machines', Control in Power Electronics Selected Problems, Academic Press, USA, 251-299 (2002) [B1]

Chapter in A2 Book (B2) (1 outputs)

Year	Citation	Link
2001	Rahman M F, Patterson D, Cheok A, Betz Robert Eric, 'Motor Drives', Power Electronics Handbook, Academic Press, San Diego, California USA, 663-727 (2001) [B2]

Journal Articles (18 outputs)

Refereed Article in a Scholarly Journal (C1) (17 outputs)

Year	Citation	Link
2012	Townsend Chris, Summers Terrence James, Betz Robert Eric, 'Multigoal heuristic model predictive control technique applied to a cascaded H-bridge StatCom', IEEE Transactions on Power Electronics, 27 1191-1200 (2012) [C1]
2011	Dorrell David G, Knight Andrew M, Betz Robert Eric, 'Improvements in brushless doubly fed reluctance generators using high-flux-density steels and selection of the correct pole numbers', IEEE Transactions on Magnetics, 47 4092-4095 (2011) [C1]
2008	Betz Robert Eric, Mirzaeva Galina, 'Frame alignment stability issues in natural field orientation', IEEE Transactions on Industry Applications, 44 575-593 (2008) [C1]
2004	Summers Terrence James, Betz Robert Eric, 'Dead-time issues in predictive current control', IEEE Transactions on Industry Applications, 40 835-844 (2004) [C1]
2003	Betz Robert Eric, M G Jovanovic, 'Introduction to the Space Vector Modeling of the Brushless Doubly Fed Reluctance Machine', Electric Power Components and Systems, 31 729-755 (2003) [C1]
2002	Betz Robert Eric, Jovanovic M G, 'Theoretical Analysis of Control Properties for the Brushless Doubly Fed Reluctance Machine', IEEE Transactions on Energy Conversion, 17 332-339 (2002) [C1]
2002	Jovanovic M G, Betz Robert Eric, Yu J, 'The Use of Doubly Fed Reluctance Machines for Large Pumps and Wind Turbines', IEEE Transactions on Industry Applications, 38 1508-1515 (2002) [C1]
2001	Betz Robert Eric, Cook Brian James, 'Instantaneous power control of induction machines', Journal of Electrical & Electronics Engineering, Australia, 21 No. 1 57-63 (2001) [C1]
2000	Betz Robert Eric, Jovanic M G, 'The Brushless Doubly Fed Reluctance Machine and the Synchronous Reluctance Machine - A comparison', IEEE Transactions on Industry Applications, 36, No 4 1103-1110 (2000) [C1]
2000	Broadfoot A R, Betz Robert Eric, 'Power requirement prediction for armoured face conveyors', Transactions of the Institution of Mining and Metallurgy, 109 93-101 (2000) [C1]
1999	Henriksen Soren John, Betz Robert Eric, Cook Brian James, 'Digital Hardware Implementation of a Current Controller for IM Variable-Speed Drives', IEEE Transactions on Industry Applications, 35, No 5 1021-1029 (1999) [C1]
1999	Jovanovic M G, Betz Robert Eric, 'Effects of Uncompensated Vector Control on Synchronous Reluctance Motor Performance', IEEE Transactions on Energy Conversion, 14, No. 3 532-537 (1999) [C1]
1999	Jovanovic M G, Betz Robert Eric, 'Off Line Testing of Reluctance Machines', IEEE Transactions on Energy Conversion, 14, No. 3 264-269 (1999) [C1]
1999	Jovanovic M G, Betz Robert Eric, 'Optimal Torque Controller for Synchronous Reluctance Machines', IEEE Transactions on Energy Conversion, 14, No. 4 1088-1093 (1999) [C1]
1998	Broadfoot A R, Betz Robert Eric, 'Control Problems in Armored Face Conveyors for Longwall Mines', IEEE Transactions on Industry Applications, 34 381-386 (1998) [C1]
1998	Broadfoot A R, Betz Robert Eric, 'New Control Strategies for Longwall Armored Face Conveyors', IEEE Transactions on Industry Applications, 34 387-394 (1998) [C1]
1998	Jovanovic M G, Betz Robert Eric, Platt D, 'Sensorless Vector Controller for a Synchronous Reluctance Motor', IEEE Transactions on Industry Applications, 34 346-354 (1998) [C1]
Show 14 more

Non Refereed Article in a Professional Journal (C3) (1 outputs)

Year	Citation	Link
2001	Jovanovic M G, Betz Robert Eric, 'Control Strategies for Brushless Doubly Fed Reluctance Machines', The Transactions of the Institute of Electrical Engineers of Japan, 121-D 272-278 (2001) [C3]

Conference Publication (83 outputs)

Full Written Paper - Refereed (E1) (76 outputs)

Year	Citation	Link
2012	Gay David, Betz Robert Eric, Summers Terrence James, 'Development of a power quality measurement instrument for mining applications', Proceedings of the 2012 Australian Mining Technology Conference, Perth, Western Australia (2012) [E1]
2012	Marks Nathan Daniel, Summers Terrence James, Betz Robert Eric, 'Photovoltaic power systems: A review of topologies, converters and controls', AUPEC 2012 22nd Australasian Universities Power Engineering Conference, Bali, Indonesia (2012) [E1]
2012	Mirzaeva Galina, Summers Terrence James, Betz Robert Eric, 'A laboratory system to produce a highly accurate and uniform magnetic field for sensor calibration', IEEE-ICIT'12: 2012 IEEE International Conference on Industrial Technology Proceedings, Athens, Greece (2012) [E1]
2012	Rowe Christopher N, Summers Terrence James, Betz Robert Eric, Moore Timothy G, 'Distributed Stars (D-Stars): A system topology for microgrids', AUPEC 2012 22nd Australasian Universities Power Engineering Conference, Bali, Indonesia (2012) [E1]
2012	Townsend Chris, Vodden J, Watson A J, Summers Terrence James, Betz Robert Eric, Clare J C, 'Non-uniform capacitor voltage ripple in a cascaded H-bridge StatCom', AUPEC 2012 22nd Australasian Universities Power Engineering Conference, Bali, Indonesia (2012) [E1]
2011	Knight Andrew M, Betz Robert Eric, Dorrell David, 'Design and analysis of brushless doubly fed reluctance machines', IEEE Energy Conversion Congress & Exposition: ECCE 2011 Proceedings, Phoenix, Arizona (2011) [E1]
2011	Knight Andrew M, Betz Robert Eric, Dorrell David, 'Design principles for brushless doubly fed reluctance machines', Proceedings. IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society, Melbourne, Vic (2011) [E1]
2011	Rowe Christopher Noel, Summers Terrence James, Betz Robert Eric, 'A novel parallel voltage and current control scheme implementing P-F and Q-V droop in a microgrid', Proceedings of the 2011-14th European Conference on Power Electronics and Applications (EPE 2011), Birmingham, UK (2011) [E1]
2011	Rowe Christopher Noel, Summers Terrence James, Betz Robert Eric, Cornforth D J, 'An intelligent current limiter and zero active power Injection algorithm for microgrid voltage support', 2011 IEEE Ninth International Conference on Power Electronics and Drive Systems (PEDS), Singapore (2011) [E1]
2011	Rowe Christopher Noel, Summers Terrence James, Betz Robert Eric, Cornforth D J, 'Small signal stability analysis of arctan power frequency droop', 2011 IEEE Ninth International Conference on Power Electronics and Drive Systems (PEDS), Singapore (2011) [E1]
2011	Shackleford J, Betz Robert Eric, Summers Terrence James, Gay David, Mirzaeva Galina, Haneman D, 'Static compensators for voltage control in mining applications', 2011 Australian Mining Technology Conference Proceedings, Noosa (2011) [E1]
2011	Summers Terrence James, Gay David, Curran Zach Alan, Betz Robert Eric, Mirzaeva Galina, 'Renewable energy resources in mining', 2011 Australian Mining Technology Conference Proceedings, Noosa (2011) [E1]
2011	Townsend Chris, Summers Terrence James, Betz Robert Eric, 'Novel phase shifted carrier modulation for a cascaded H-bridge multi-level StatCom', Proceedings of the 2011-14th European Conference on Power Electronics and Applications (EPE 2011), Birmingham, UK (2011) [E1]
2011	Townsend Chris, Summers Terrence James, Betz Robert Eric, 'Optimisation of switching losses and harmonic performance using model predictive control of a cascaded H-bridge multi-level StatCom', ECCE 2011 Proceedings, Phoenix, AZ (2011) [E1]
2011	Townsend Chris, Vodden J, Watson A J, Summers Terrence James, Betz Robert Eric, Clare J C, 'The effect of space vector modulation on capacitor voltage ripple in a cascaded H-bridge StatCom', 2011 IEEE Ninth International Conference on Power Electronics and Drive Systems (PEDS), Singapore (2011) [E1]
2010	Betz Robert Eric, Mirzaeva Galina, Summers Terrence James, 'A dynamic dynamometer for testing of mining DC motors', 2010 IEEE Industry Applications Society Annual Meeting, Houston, Texas (2010) [E1]
2010	Betz Robert Eric, Townsend Chris, Summers Terrence James, Mirzaeva Galina, 'Simultaneous estimation of sequence and harmonic components for StatCom applications', 14th International Power Electronics and Motion Control Conference, EPE-PEMC 2010, Ohrid, Republic of Macedonia (2010) [E1]
2010	Mirzaeva Galina, Summers Terrence James, Betz Robert Eric, 'Instrumentation and experimental investigation of industrial DC machines for condition monitoring purposes', 19th International Conference on Electrical Machines, ICEM 2010, Rome, Italy (2010) [E1]
2010	Mirzaeva Galina, Welsh James Stuart, Summers Terrence James, Betz Robert Eric, 'Experimental investigation of frequency characteristics of large industrial DC machines with thyristor-based drives', 20th Australasian Universities Power Engineering Conference:, Christchurch, NZ (2010) [E1]
2010	Mirzaeva Galina, Welsh James Stuart, Summers Terrence James, Betz Robert Eric, 'Frequency analysis of experimental waveforms for DC motors in digging applications', 2010 IEEE Industry Applications Society Annual Meeting, IAS 2010, Houston, Texas (2010) [E1]
2010	Rowe Christopher Noel, Fang L, Summers Terrence James, Betz Robert Eric, 'The windro skyscraper: A concept', 20th Australasian Universities Power Engineering Conference:, Christchurch, NZ (2010) [E1]
2010	Rowe Christopher Noel, Summers Terrence James, Betz Robert Eric, 'Arctan power frequency droop for power electronics dominated microgrids', 20th Australasian Universities Power Engineering Conference:, Christchurch, NZ (2010) [E1]
2010	Rowe Christopher Noel, Summers Terrence James, Betz Robert Eric, Cornforth D, 'A comparison of instantaneous and fryze power calculations on P-F and Q-V droop in microgrids', 20th Australasian Universities Power Engineering Conference:, Christchurch, NZ (2010) [E1]
2010	Townsend Chris, Summers Terrence James, Betz Robert Eric, 'Comparison of modulation strategies for a cascaded H-bridge StatCom- Part 1: Theoretical background', Proceedings - IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society, Glendale, AZ (2010) [E1]
2010	Townsend Chris, Summers Terrence James, Betz Robert Eric, 'Comparison of modulation strategies for a cascaded H-bridge StatCom- Part 2: Application of the analysis', Proceedings - IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society, Glendale, AZ (2010) [E1]
2010	Townsend Chris, Summers Terrence James, Betz Robert Eric, 'Estimation of loss components in a cascaded H-bridge Statcom', 20th Australasian Universities Power Engineering Conference:, Christchurch, NZ (2010) [E1]
2010	Townsend Chris, Summers Terrence James, Betz Robert Eric, 'Model predictive control of a cascaded H-bridge multi-level StatCom', 2010 2nd IEEE Energy Conversion Congress and Exposition, ECCE 2010, Atlanta, GA (2010) [E1]
2009	Betz Robert Eric, Mirzaeva Galina, Townsend Chris, Summers Terrence James, 'Feed-forward compensation for multilevel cascaded H-bridge StatComs', EPE '09: 13th European Conference on Power Electronics and Applications. Proceedings, Barcelona, Spain (2009) [E1]
2009	Betz Robert Eric, Summers Terrence James, Mirzaeva Galina, 'Active filtering and VAR control of a cascaded H-bridge multi-level StatCom', 2009 International Conference on Power Electronics and Drive Systems, PEDS 2009, Taipei, Taiwan (2009) [E1]
2009	Betz Robert Eric, Summers Terrence James, Mirzaeva Galina, 'Comparison of three harmonic extraction techniques for active filters', AUPEC'09: 19th Australasian Universities Power Engineering Conference: Sustainable Energy Technologies and Systems, Adelaide, SA (2009) [E1]
2009	Betz Robert Eric, Summers Terrence James, Mirzaeva Galina, 'Dead-time compensation for multilevel cascaded H-bridge converters with novel voltage balancing', EPE '09: 13th European Conference on Power Electronics and Applications. Proceedings, Barcelona, Spain (2009) [E1]
2009	Mirzaeva Galina, Betz Robert Eric, Summers Terrence James, 'Evaluation of current density in DC motor brushes for mining machines based on air gap field measurement', 2009 IEEE Industry Applications Society Annual Meeting. Conference Record, Houston, Texas (2009) [E1]
2009	Mirzaeva Galina, Betz Robert Eric, Summers Terrence James, 'Experimental investigation of DC motor performance with respect to its loading conditions', Proceedings of the 2009 Australian Mining Technology Conference, Brisbane, QLD (2009) [E1]
2009	Mirzaeva Galina, Betz Robert Eric, Summers Terrence James, 'Performance evaluation of DC motors for electric rope shovels based on air gap flux measurement', AUPEC'09: 19th Australasian Universities Power Engineering Conference: Sustainable Energy Technologies and Systems, Adelaide, SA (2009) [E1]
2009	Summers Terrence James, Betz Robert Eric, Mirzaeva Galina, 'Phase leg voltage balancing of a cascaded H-Bridge converter based STATCOM using zero sequence injection', EPE '09: 13th European Conference on Power Electronics and Applications. Proceedings, Barcelona, Spain (2009) [E1]
2008	Betz Robert Eric, Cook Brian James, Summers Terrence James, Fisher Robin David, Bastiani Adriano, Shao Shengjie, Stepien Peter, Willis Keith Cherry, 'Outline of the design of a cascaded H-bridge medium voltage STATCOM', Proceedings of the 13th International Power Electronics and Motion Control Conference, 2008, Poznan, Poland (2008) [E1]
2008	Betz Robert Eric, Cook Brian James, Summers Terrence James, Fisher Robin David, Bastiani Adriano, Shao Shengjie, Willis Keith Cherry, 'Update on the development of a medium voltage multilevel cascaded H-bridge STATCOM', AUPEC '08 Australasian Universities Power Engineering Conference 2008, Sydney, NSW (2008) [E1]
2008	Betz Robert Eric, Summers Terrence James, Cook Brian James, Bastiani Adriano, 'Multilevel STATCOM: Power quality control in mining applications', Proceedings of the 2008 Australian Mining Technology Conference, Sunshine Coast, QLD (2008) [E1]
2008	Mirzaeva Galina, Betz Robert Eric, 'Advantages and limitations of the NFO control algorithm', AUPEC '08 Australasian Universities Power Engineering Conference 2008, Sydney, NSW (2008) [E1]
2008	Mirzaeva Galina, Betz Robert Eric, Summers Terrence James, Marxsen I, 'Development of a unique DC motor test facility in the Hunter Valley', Proceedings of the 2008 Australian Mining Technology Conference, Sunshine Coast, QLD (2008) [E1]
2007	Betz Robert Eric, Cook Brian James, Summers Terrence James, Palmer R, Bastiani A, Shao S, Willis K, 'Design and development of an 11kV H-Bridge multilevel STATCOM', 2007 Australasian Universities Power Engineering Conference. AUPEC '07. Proceedings, Perth, W. Aust. (2007) [E1]
2007	Mirzaeva Galina, Betz Robert Eric, 'An improved natural field orientation control of a current fed induction machine', Proceedings of IEEE International Electric Machines and Drives Conference, IEMDC 2007, Antalya, Turkey (2007) [E1]
2007	Mirzaeva Galina, Betz Robert Eric, 'Analysis of frame alignment issues in natural field orientation including non-linear and leakage inductance effects', 2007 European Conference on Power Electronics and Applications. Conference Proceedings, Aalborg, Denmark (2007) [E1]
2007	Mirzaeva Galina, Betz Robert Eric, 'Natural field orientation concept: A tutorial', Proceedings of IEEE International Electric Machines and Drives Conference, IEMDC 2007, Antalya, Turkey (2007) [E1]
2007	Mirzaeva Galina, Betz Robert Eric, 'Parameter sensitivity issues in natural field orientation', Proceedings of the IEEE Industry Applications Conference, 2007. 42nd IAS Annual Meeting, New Orleans (2007) [E1]
2007	Mirzaeva Galina, Betz Robert Eric, 'Slow speed performance of an NFO-controlled induction machine', 2007 Australasian Universities Power Engineering Conference. AUPEC '07. Proceedings, Perth (2007) [E1]
2007	Summers Terrence James, Betz Robert Eric, 'Stability analysis of the instantaneous power control (IPC) algorithm for induction machines', 2007 European Conference on Power Electronics and Applications. Proceedings, Aalborg, Denmark (2007) [E1]
2006	Betz Robert Eric, Mirzaeva Galina, 'Frame Alignment Stability Issues in Natural Field Orientation', Conference Record of the 2006 IEEE Industry Applications Conference, Forty-First IAS Annual Meeting, Tampa, Florida, USA (2006) [E1]
2006	Betz Robert Eric, Palmer R, Summers Terrence James, Cook Brian James, Hogg P, 'H-Bridge Multilevel STATCOM for Mining Applications', Proceedings of the 2006 Australian Mining Technology Conference "Value through Cost Control", Hunter Valley, NSW, Australia (2006) [E1]
2006	Betz Robert Eric, Summers Terrence James, Furney Todd, 'Symmetry Compensation using a H-Bridge Multilevel STATCOM with Zero Sequence Injection', Conference Record of the 2006 IEEE Industry Applications Conference, Forty-First IAS Annual Meeting, Tampa, Florida, USA (2006) [E1]
2006	Schulz Erich Muschka, Betz Robert Eric, 'Use of Doubly Fed Reluctance Machines in Wind Power Generation', Proceedings of the 12th International Power Electronics and Motion Control Conference, Portoroz, Slovenia (2006) [E1]
2006	Summers Terrence James, Betz Robert Eric, McGrath Brendan Peter, Goodwin Graham Clifford, 'Induction Machine Shaft Speed Estimation using Imaginary Power', Proceedings of the EPE-PEMC 2006 12th International Power Electronics and Motion Control Conference, Portoroz, Slovenia (2006) [E1]
2005	Betz Robert Eric, Summers Terrence James, 'Sensorless Instantaneous Power Control of Induction Machines', Proceedings of 11th European Conference on Power Electronics and Applications, Dresden, Germany (2005) [E1]
2005	Schulz Erich Muschka, Betz Robert Eric, 'Optimal Torque Per Amp For Brushless Doubly Fed Reluctance Machines', Proceedings of Industry Applications Conference, 2005, Kowloon, Hong Kong (2005) [E1]
2004	Schulz Erich Muschka, Betz Robert Eric, 'Impact on winding and gap flux density harmonics on brushless doubly fed reluctance machines', CD ROM, Edinburgh (2004) [E1]
2004	Summers Terrence James, Betz Robert Eric, 'Instantaneous power control of induction machines using a novel filtering approach on the back-emf estimates', CD ROM, Edinburgh (2004) [E1]
2004	Summers Terrence James, Betz Robert Eric, 'Instantaneous power control of induction machines- robustness issues', CD ROM, Riga (2004) [E1]
2003	Betz Robert Eric, Summers Terrence James, 'Speed Estimation for Induction Machines Using Imaginary Power', Proceedings for IAS 2003, Salt Lake City, USA (2003) [E1]
2003	Schulz Erich Muschka, Betz Robert Eric, 'Optimal Rotor Design for Brushless Doubly Fed Reluctance Machines', Proceedings for IAS 2003, Salt Lake City, USA (2003) [E1]
2003	Summers Terrence James, Betz Robert Eric, 'Comparison of Instantaneous Power Control and Field Oriented Control of Induction Machines', Proceedings for EPE 2003, Toulouse, France (2003) [E1]
2002	Jovanovic M G, Betz Robert Eric, 'Slip power recovery systems based on brushless doubly fed reluctance machines', Proceedings of the Power Conversion Conference - Osaka 2002, Osaka, Japan (2002) [E1]
2002	Summers Terrence James, Betz Robert Eric, 'Dead-time Issues in Predictive Current Control', Conference Record of the 2002 IEEE Industry Applications Conference 37th IAS Annual Meeting, Pennsylvania (2002) [E1]
2001	Henriksen Soren John, Betz Robert Eric, Cook Brian James, 'Practical Issues with predictive Current Controllers', 2001 Australasian University Power Engineering Conference, Perth WA, Australia (2001) [E1]
2001	Jovanovic M G, Betz Robert Eric, 'A Comparative Analysis of Doubly Fed Reluctance Machine's Performance Parameters', 9th European Conference on Power Electronics and Applications, Graz, Austria (2001) [E1]
2000	Betz Robert Eric, Cook Brian James, 'Instantaneous Power Control - an Alternative to Vector and Direct Torque Control?', Conference Record of the 2000 IEEE Industry Applications Conference, Rome, Italy (2000) [E1]
2000	Betz Robert Eric, Cook Brian James, 'Instantaneous Power Control of Induction Machines', AUPEC 2000 Innovation for Secure Power, Brisbane, Australia (2000) [E1]
2000	Jovanic M G, Betz Robert Eric, 'Control Strategies for Brushless Doubly Fed Reluctance Machines', IPEC-Tokyo 2000 Proceedings, Tokyo, Japan (2000) [E1]
2000	Jovanovic M G, Betz Robert Eric, 'Power factor control using brushless doubly fed reluctance machines', Conference Record of the 2000 IEEE Industry Applications Conference, Rome, Italy (2000) [E1]
2000	Jovanovic M G, Betz Robert Eric, 'Power factor control using brushless doubly fed reluctance machines', Conference Record of the 2000 IEEE Industry Applications Conference, Rome, Italy (2000) [E1]
1999	Betz Robert Eric, Jovanovic M G, 'Brushless Doubly Fed Reluctance Machines a Tutorial', AUPEC/EECON'99 Proceedings, Northern Territory University, Darwin NT Australia (1999) [E1]
1999	Betz Robert Eric, Jovanovic M G, 'Control Aspects of Brushless Doubly Fed Reluctance Machines', 8th European Conference on Power Electronics and Applications, EPE'99, Lausanne, Switzerland (1999) [E1]
1999	Betz Robert Eric, Jovanovic M G, 'The Brushless Doubly Fed Reluctance Machine and the Synchronous Reluctance Machine - A comparison', Conference Record of the 1999 IEEE Industry Applications Conference 34th Annual Meeting, Phoenix Arizona USA (1999) [E1]
1999	Henriksen Soren John, Betz Robert Eric, Cook Brian James, 'Induction Machine Current Control in Digital Hardware', AUPEC/EECON'99 Proceedings, Northern Territory University, Darwin NT Australia (1999) [E1]
1999	Jovanovic M G, Betz Robert Eric, 'Optimal Control of Brushless Doubly Fed Reluctance Machines', Proceedings of the ELECTRIMACS 99, Lisbon, Portugal (1999) [E1]
1999	Jovanovic M, Betz Robert Eric, 'Optimal Performance of Brushless Doubly Fed Reluctance Machines', Ninth International Conference on Electrical Machines and Drives, Canterbury Christ Church College, UK (1999) [E1]
1998	Henriksen Soren John, Betz Robert Eric, Cook Brian James, 'Digital Hardware Implementation of a Current Controller for IM Variable Speed Drives', Conference Record of the 1998 IEEE Industry Applications Conference, St Louis, Missouri, USA (1998) [E1]
Show 73 more

Full Written Paper - Non Refereed (E2) (7 outputs)

Year	Citation	Link
2011	Dorrell David G, Knight Andrew M, Betz Robert Eric, 'Issues with the design of brushless doubly-fed reluctance machines: Unbalanced magnetic pull, skew and iron losses', 2011 IEEE International Electric Machines & Drives Conference (IEMDC), Niagara Falls, ON (2011) [E2]
2008	Betz Robert Eric, Summers Terrence James, Cook B J, 'Outline of the control design for a cascaded H-bridge STATCOM', 2008 IEEE Industry Applications Society Annual Meeting, IAS'08, Edmonton, Alberta (2008) [E2]
2007	Betz Robert Eric, Summers Terrence James, 'Using a cascaded H-Bridge STATCOM for rebalancing unbalanced voltages', 7th International Conference on Power Electronics. ICPE'07. Papers, Daegu, Korea (2007) [E2]
2001	Betz Robert Eric, Cook Brian James, 'Instantaneous Power Control of Induction Machines', 9th European Conference on Power Electronics and Applications, Graz, Austria (2001) [E2]
2001	Betz Robert Eric, Henriksen Soren John, Cook Brian James, Summers Terrence James, 'Practical Aspects of Instantaneous Power Control of Induction Machines', Conference Record of the 2001 IEEE Industry Applications Conference 36th IAS Annual Meeting, Hyatt Regency Hotel, Chicago, Illinois, USA (2001) [E2]
2001	Jovanovic M G, Betz Robert Eric, Yu J, 'The use of doubly fed reluctance machines for large pumps and wind turbines', Conference Record of the 2001 IEEE Industry Applications Conference 36th IAS Annual Meeting, Hyatt Regency Hotel, Chicago, Illinois, USA (2001) [E2]
2001	Jovanovic M G, Betz Robert Eric, Yu J, Levi E, 'Aspects of Vector and Scalar Control of Brushless Doubly Fed Reluctance Machines', The 4th IEEE International Conference on Power Electronics and Drive Systems, Bali, Indonesia (2001) [E2]
Show 4 more

The University of Newcastle, Australia